Sealer with folding frame DSHRN series

Single top sheet

Single side sheets

Aluminum frame

The movable top sheet is designed to provide additional sealing of the opening. It is also recommended to use it if loading and unloading operations are carried out with a fleet of vehicles with bodies of different heights.

Large corner pillow.

Small corner pillow.

Wheel guides are designed to allow vehicles to be parked quickly and accurately at a dock and to protect seals and building walls from damage. The guides are designed to minimize possible contact with the vehicle's wheel rim. They are steel pipes with a diameter of 159 mm with bends for fastening. The base color is RAL2004, painting in any color according to the RAL card or hot-dip galvanized is also possible. The guides are installed on the site in front of the dock in two ways: with anchor bolts and with the help of concreting.

The bumper posts are designed to protect the corner posts of the gate from damage in the event of a collision with a forklift. The posts are installed indoors in front of the posts. The diameter of the bumper column is from 100 to 159 mm. The base color is RAL2004, painting in any color according to the RAL card or hot-dip galvanized is also possible.

Article "BR250x250x100". Basic rubber bumper 250 x 250 x 100 mm. Ensures safe access of the truck to the loading area and prevents damage to the walls of the building. For installation dimensions, see the “Drawings” section.

Article "BR450x250x100". Basic rubber bumper 450 x 250 x 100 mm. Ensures safe access of the truck to the loading area and prevents damage to the walls of the building. For installation dimensions, see the “Drawings” section.

Article "BRC510x250x330". Built on a bumper 450 x 250 x 100 mm. Rubber bumper 510 x 250 x 330 mm (external dimensions) cantilever type. Ensures safe access of the truck to the loading area and prevents damage to the walls of the building. Used when the height of the car body may be greater than the height of the ramp. For installation dimensions, see the “Drawings” section.

Article "BRM610x250x175". Built on a bumper 450 x 250 x 100 mm. Rubber bumper 610 x 250 x 175 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to its mobility. For installation dimensions, see the “Drawings” section.

Article "BRM600x364x110". Built on a bumper 450 x 250 x 100 mm. Rubber bumper 600 x 364 x 110 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to its mobility. Can only be used with platforms with a retractable lip 1,000 mm long. For installation dimensions, see the “Drawings” section.

Article "BRSP(16)465х250х165". Built on a bumper 450 x 250 x 100 mm. Bumper 465 x 250 x 165 mm (external dimensions) with a steel working pad 16 mm thick. Consists of a shock-absorbing filler over the entire surface (rubber bumper 450 x 250 x 100 mm), covered with a durable outer steel plate. For installation dimensions, see the “Drawings” section.

Article "BRSP(16)465х250х165S". Built on a bumper 450 x 250 x 100 mm. Bumper 465 x 250 x 165 mm (external dimensions) with a steel working pad 16 mm thick and a parking sensor. It consists of a shock-absorbing filler over the entire surface (rubber bumper 450 x 250 x 100 mm), covered with a durable outer steel plate and a parking deck, which ensures safe docking of the truck. Used in a system with parking radar. For installation dimensions, see the “Drawings” section.

Article "BS500x255x205". Built on a bumper 450 x 250 x 100 mm. Steel bumper 500 x 255 x 205 mm (external dimensions) with damper insert. It is a hybrid bumper, a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumbs and a movable, durable outer steel cover that can move following the movements of the car body. Can only be used with platforms with a retractable lip 1,000 mm long. For installation dimensions, see the “Drawings” section.

Article "BS800x255x205". Built on a bumper 450 x 250 x 100 mm. Steel bumper 800 x 255 x 205 mm (external dimensions) with damper insert. It is a hybrid bumper, a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumbs and a movable, durable outer steel cover that can move following the movements of the car body. Can only be used with platforms with a retractable lip 1,000 mm long. For installation dimensions, see the “Drawings” section.